-
mcr FID PRO
Low-resistance circular single-blade cut-off fire dampers for comfort ventilation systems.
mcr FID PRO with diameter 201-315 mm installed in concrete ceilings are S-rated.
nominal diameter D from 100 mm to 315 mm.
Key features
-
Fire-resistant product
-
Light and solid construction
-
Easy fit- another connection available
-
Variety of adjusting methods
mcr FID PRO
Certificate of constancy of performance 2434-CPR-0009.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Declaration of performance 003-05-CPR-2015.
Optional EX making of dampers (as per ATEX directive) for applications in explosion hazard zones.
KDB ATEX 17.0616, EU Declaration of conformity 001-01-2017.
Available materials:
- galvanised steel, Zn 275 g/m2 coating
- stainless steel
- 1.4404 acid-proof steel
- low flow resistance
- nipple or muff variant
- installation in walls and ceilings
- optional making in EX variant
- operating reliability up to 10 000 cycles
-
-
mcr ZIPP
Cut-off fire valves.
EI120 (ve ho o→i)S / EI120 (ve i→o) / EI180 (ve o→i)S
Key features
-
-
-
Enkel montage
mcr ZIPP
Certificate of constancy of performance 1396-CPR-0092.
Valves are certified for conformity with EN 15650.
Valves are classified as per EN 13501-3 and tested according to EN 1366-2.
Declaration of performance 002-05-CPR-2015.
- fire resistance up to 180 minutes
- possibility of operation with electromagnetic activator
- installation in walls and ceilings
- possibility of ductless installation
-
-
Mcr FID S/S p/P
Single blade cut-off fire dampers for comfort ventilation systems.
EI120(ve ho i<->o)S
Rectangular dampers:
- nominal width B: from 200 mm to 1500 mm
- nominal height H: from 200 mm to 1500 mm
- the maximum cross-section surface of one damper up to 1.8 m2
Key features
-
Fire-resistant product
-
Bestseller
-
Easy fit- another connection available
Mcr FID S/S p/P
Certificate of constancy of performance 1488-CPR-0422/W and 1396-CPR-0103.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Declaration of performance 004-05-CPR-2015.
Optional EX making of dampers (as per ATEX directive) for applications in explosion hazard zones.
KDB ATEX 17.0616, EU Declaration of conformity 001-01-2017.
- galvanised steel, Zn 275 g/m2 coating
- stainless steel
- 1.4404 acid-proof steel
- damper reinforced with insulating interlayer
- bracing-reinforced barrier - increased mechanical strength
- large dimensions – up to 1.8 m2
- also available in smoke extract version
-
-
MCR FID S/S P/O
Single blade cut-off fire dampers for comfort ventilation systems.
EI120(ve ho i<->o)S
Circular dampers:
• nominal diameter D from 250 mm to 630 mm
Apart from the standard dimensions, fire dampers may be manufactured with intermediate dimensions (in 1 mm increments, in the given range).
Key features
-
Fire-resistant product
-
Bestseller
MCR FID S/S P/O
Certificate of constancy of performance 1488-CPR-0422/W and 1396-CPR-0103.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Declaration of performance 004-05-CPR-2015.
Optional EX making of dampers (as per ATEX directive) for applications in explosion hazard zones.
KDB ATEX 17.0616, EU Declaration of conformity 001-01-2017.
- galvanised steel, Zn 275 g/m2 coating
- stainless steel
- 1.4404 acid-proof steel
- damper reinforced with insulating interlayer
- bracing-reinforced barrier - increased mechanical strength
- large dimensions – up to 1.8 m2
- also available in smoke extract version
-
-
Mcr WIP/S
Multi-blade cut-off fire damper for comfort ventilation systems.
EI60(ve i↔o)S, E120(ve i↔o)S
Key features
-
Fire-resistant product
-
Bestseller
Mcr WIP/S
Certificate of constancy of performance 1396-CPR-0097.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Declaration of performance 001-05-CPR-2015.
Optional EX making of dampers (as per ATEX directive) for applications in explosion hazard zones.
KDB ATEX 17.0616, EU Declaration of conformity 001-01-2017.
- galvanised steel, Zn 275 g/m2 coating
- stainless steel
- 1.4404 acid-proof steel
- small thickness of damper - 140 mm
- cut-off barrier does not protrude outside the damper body, regardless of damper dimensions
- large active damper in the multi-plane dampers segment
- possible installation in a partition, on a duct ended with a duct cover
- optional making in EX variant
- optional making of dampers with penetrations for rounded ducts
also available in smoke extract and transfer and relief version.
-
-
Mcr WIP PRO/S
Multi-blade cut-off fire damper for comfort ventilation systems.
EI120(ve i↔o)S, EI90(ho i↔o)S, E120(ho i↔o)S
Made from fireboard.
Key features
-
Fire-resistand product
-
Highest quality product
-
Also available in Smoke Extract version
Mcr WIP PRO/S
Certificate of constancy of performance 2434-CPR-0003.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Declaration of performance 009-05-CPR-2016.
Optional EX making of dampers (as per ATEX directive) for applications in explosion hazard zones.
KDB ATEX 17.0616, EU Declaration of conformity 001-01-2017.
- small thickness of damper - 135 mm
- cut-off barrier does not protrude outside the damper body, regardless of damper dimensions
- possible installation in a partition, on a duct ended with a duct cover
- optional making in EX variant
- optional making of dampers with penetrations for rounded ducts
- operating reliability up to 10 000 cycles
Mcr WIP PRO/S also available in smoke extract version
-
-
KTM
KTM circular single-blade cut-off fire damper
EI 120 (ve ho i↔o) S
EI 90 (ve i↔o) S
EI 60 (ve i↔o) S
EI 30 (ve i↔o) S
Key features
-
Fire-resistant product
KTM
Certificate of constancy of performance 1438-CPR-0529.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Casing tightness class B acc. PN-EN 1751
Diameters: 100-250mm.
-
-
KTS
Circular single-blade cut-off fire dampers.
EI 120 (ve ho i↔o) S
EI 90 (ve i↔o) S
EI 60 (ve i↔o) S
EI 30 (ve i↔o) S
Key features
-
Fire-resistant product
KTS
Certificate of constancy of performance 1438-CPR-0528.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Casing tightness class c acc. PN-EN 1751
Diameters: 160-630mm.
-
-
KWP-L
Single-blade cut-off damper.
EI 120 (ve ho i↔o) S
EI 90 (ve i↔o) S
EI 60 (ve i↔o) S
EI 30 (ve i↔o) S
Key features
-
Fire-resistant product
KWP-L
Certificate of constancy of performance 1438-CPR-0529.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Casing tightness class C acc. PN-EN 1751
Dimensions: 200x200mm – 800x500mm.
-
-
KWP-O-E(S)
Single-blade cut off damper.
EI120 (ve ho i ↔ o) S
Key features
-
Fire-resistant product
KWP-O-E(S)
Certificate of constancy of performance 1488-CPR-0444/W.
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Casing tightness class C acc. PN-EN 1751
Dimensions: 200x200mm – 1500x1000mm (cross section up to 1,5m2).
-
-
WKP-O
Multi-blade cut off damper.
EI 120 (ve i↔o) S
Key features
-
Fire-resistant product
WKP-O
Certificate of constancy of performance 2434-CPR-0010
Dampers certified for conformance with EN 15650.
Dampers are classified as per EN 13501-3 and tested according to EN 1366-2.
Casing tightness class C acc. PN-EN 1751
Dimensions: 200x200mm – 1200x800mm.
-
Our Offer
Go to the front page
